|
|
Post by diesel17 on Mar 29, 2017 0:39:14 GMT -5
Hi guys, I have been using this site for quite some time now to help me with some questions and with rebuilding an old 24V B series .30-30/20G that was handed down to me. I have searched high and low for a barrel band with the incorporated sight. I have checked all the usual spots online that are always listed here and have been able to find all my other parts needed except for this. I know from an earlier thread (thanks bigkelly) that all 24V barrels excluding 24V-A, have the same O.D. So I assume any barrel band whether it is .222, .223. .22hornet, .357 mag, or .30-30 will be interchangeable and work for me. My question is does anyone have a band they are willing to part with or know of one for sale? Any help at all would be much appreciated.
|
|
|
|
Post by bigkelly on Mar 29, 2017 5:48:08 GMT -5
|
|
|
|
Post by diesel17 on Mar 29, 2017 8:40:41 GMT -5
I did see this. No dice unfortunately. Those are just sight blades. Thanks for the quick response though.
|
|
|
|
Post by diesel17 on Mar 29, 2017 14:29:33 GMT -5
The reason I am looking for a new barrel band is because the tip of the sight is broken off. I am thinking of getting a little creative and cutting a dovetail into the broken band and adding a new blade to it. Would anybody have the measurements of a complete band? Total height from top to bottom and of just the the little sight blade on top after the seraded part.
|
|
|
|
Post by captcapsize on Apr 1, 2017 11:35:38 GMT -5
I would look at pics of similar 24's then make it a little taller and file it down to zero it.
|
|
|
|
Post by diesel17 on Apr 1, 2017 14:11:45 GMT -5
That is basically what I plan to do because I doubt I would find a blade the exact height of the original. I was just hoping to get an actual measurement so I would be pretty close to dead on from the start.
|
|
Savage 24v barrel band
Guest
|
Post by Savage 24v barrel band on Mar 3, 2018 9:47:06 GMT -5
Hi I have a Savage 24V in 222/20ga
and i’m looking for a barrel band or some way
to hold the barrel together
|
|
|
|
Post by captcapsize on Mar 5, 2018 20:16:53 GMT -5
I have a 24V .223/20 and the barrels are welded (brazed)? just at the muzzle. I wish it had a barrel band then perhaps I could get the POI closer. Do you have the ability to make a barrel band? If I had to make one i would have adjustment screws to register the barrels.
|
|
