wvick
Rank Stranger
Posts: 8
|
Post by wvick on Jul 19, 2014 0:49:44 GMT -5
Hi All, I was just given a Stevens .22-.410 with a crack at the wrist of the tennite stock. In trying to remove the stock there is a large(1")slotted screw at the butt plate. I can turn the screw with minor effort but it Is not coming loose? Any Ideas.
|
|
wvick
Rank Stranger
Posts: 8
|
Post by wvick on Jul 19, 2014 11:46:39 GMT -5
OK I got the plug out and the stock off, next step is to replace the firing pin for the upper barrel( I think) no pin just a bumpy area on the surface if the firing pin.
|
|
|
|
Post by captcapsize on Jul 21, 2014 9:55:07 GMT -5
Hi All, I was just given a Stevens .22-.410 with a crack at the wrist of the tennite stock. In trying to remove the stock there is a large(1")slotted screw at the butt plate. I can turn the screw with minor effort but it Is not coming loose? Any Ideas. Sounds like you are planning on replacing the stock? So maybe saw it off then do what it takes to recover the screw. |
|
wvick
Rank Stranger
Posts: 8
|
Post by wvick on Jul 21, 2014 10:45:51 GMT -5
Thanks, I did manage to figure out the stock removal. Now I sizing up the job of replacing the .22 firing pin.
|
|
