|
|
Post by captcapsize on Nov 20, 2014 13:10:33 GMT -5
I have been looking for a hammer extension with no luck. Does any one know if there are any made for other firearms that would fit the 24?
|
|
|
|
Post by bigkelly on Nov 20, 2014 17:51:49 GMT -5
I have one I got (I think) from brownells for a marlin lever gun
|
|
|
|
Post by captcapsize on Nov 20, 2014 18:58:49 GMT -5
I have a Marlin with a hammer ex. The hammer is very thin, no way it would fit the Savage club foot hammer.
|
|
|
|
Post by Andy m on Nov 21, 2014 12:31:44 GMT -5
I fitted a hammer expander , Made by Cadwell I seem to remember . Can check if your that bothered?
Does make thumbing the hammer back easier , Even more so if your wearing gloves . You just to be careful that you still got clearance under the scope if you got one fitted .
All the best fellas .
Andy .
|
|
|
|
Post by captcapsize on Nov 22, 2014 20:33:27 GMT -5
Accessing the hammer with heavy gloves on is near impossible as is, a hammer extension is a must. I have missed out on several quick shots because of it. If I can't find one to fit perhaps I can modify one or make one from scratch.
|
|
|
|
Post by neilrr on Nov 23, 2014 15:49:48 GMT -5
Captcapsize, you can go to "Uncle Mikes" web site and look under hammer extensions to see if they have one or send them an email asking if they have one that they would recommend for your specific Stevens 24 model. I was able to find a hammer extension that worked great for my Henry lever action when I mounted a scope.
|
|
|
|
Post by Mr. Polecat on Nov 23, 2014 20:28:42 GMT -5
I have an Uncle Mike's hammer extension on my 24V, but I don't remember the model number.
|
|
|
|
Post by captcapsize on Nov 23, 2014 22:34:56 GMT -5
I see one on mikes site for a H&R that might work. I'll have to have a look at an H&R to see if it is close.
|
|
|
|
Post by woodsbum on Nov 24, 2014 11:58:19 GMT -5
I've had a Uncle Mike's on my 24V series C for many years. I just looked and can't find any number on it to give you. I do see that they offer a few different sizes. As I remember I miked the hammer to locate the one that fit the best. Take your time and find the one that fits and you'll never have a problem with it. Mine has never been off since I put it on. Nothing is listed for the 24, but I'm sure that an e-mail to them would either give you the correct number to order or tell you what measurements you need to provide them with to get it.
|
|
|
|
Post by cas on Nov 26, 2014 23:32:20 GMT -5
I have a Marlin with a hammer ex. The hammer is very thin, no way it would fit the Savage club foot hammer. I dunno... Ive given a number of them (Marlin extensions) away on this site over the years to be used on 24's. tried it my own self before I gave away the first one and it worked fine. |
|
|
|
Post by captcapsize on Nov 28, 2014 16:03:26 GMT -5
Hmmm, maybe I should look again. If it will stay put on the very tip of the hammer it could work.
|
|
|
|
Post by deuteron on Mar 8, 2015 0:23:45 GMT -5
Any body out there know where I can get a hammer extension for a browning b78 high wall single shot rifle
|
|
|
|
Post by glocknutt on Mar 17, 2015 6:18:07 GMT -5
|
|
|
|
Post by captcapsize on Mar 17, 2015 18:45:30 GMT -5
Thanks, I just ordered one. Won't need until the fall.
|
|
|
|
Post by glocknutt on Mar 17, 2015 20:14:54 GMT -5
I ordered one myself, the one on my 24v has a split end on it.
|
|
