|
Post by docent on Mar 21, 2017 18:49:56 GMT -5
Got me a "hand me down" Stevens 24, (22/410) with both firing pins gone. Has anyone dealt with a gunsmith in the LA area that works on model 24's that can fix my gun?
|
|
|
Post by neilrr on Mar 22, 2017 7:30:36 GMT -5
Welcome to the forum. Replacing both firing pins in an older Model 24 .22/.410 is not very difficult. If you want to try it yourself there are several detailed posts on how to disassemble/reassemble this model 24. Parts can be obtained from various sources such as Numrich Gun Parts, Jack First, ebay, etc. Besides needing both the shotgun and rifle firing pins, you will need a spring for the rifle firing pin. The shotgun firing pin does not require a spring. As an alternative any competent gunsmith can do this work for you. Try going to the following site to see if there is one near you: www.gunsmithusa.com. If you need any further help just ask. Good luck.
|
|