|
|
24 S-A
Nov 16, 2017 19:48:06 GMT -5
via mobile
Post by nsheeh on Nov 16, 2017 19:48:06 GMT -5
Hi guys new member here sorry for repeat questions if I have them but I'm looking for some help. I've got a 24 sa 22lr over 20 ga and I'm getting inconsistent fires out of the 20 ga 22 lr fires every time but the 20 ga gets light strikes and sometimes takes me three to seven trigger pulls to fire off the round. Now mind you I've got the gun at a gunsmith and he is kind of baffled also we have replace the firing pin the spring and are still getting inconsistent fires any help would be greatly appreciated and thank you in advance
|
|
ferg
Rank Stranger
Posts: 6 
|
24 S-A
Nov 17, 2017 16:21:58 GMT -5
Post by ferg on Nov 17, 2017 16:21:58 GMT -5
|
|
|
|
24 S-A
Jan 14, 2018 5:14:39 GMT -5
via mobile
Post by nsheeh on Jan 14, 2018 5:14:39 GMT -5
Quick update I brought the Gun to a different Gun smith just to have another set of eyes to look and see if we were missing something and he found the problem . It is in the selector switch on the hammer. When the hammer was caulked in the 20 ha position it could move slightly. Enough to cause light strikes so I make sure it is fully in the 20 position and it fires every time. So if you are have light strikes issues this may help you or it may not but that was the problem for this particular Gun
|
|
