|
Post by alecpeirce on Apr 8, 2022 14:00:33 GMT -5
I know this is a well-worn topic but here it is again. I'm having a heck of a time finding the correct Rifle Firing Pin Screw for my 24H-DL. I've ordered a few but none are right. This is a 22WMR. The Firing Pin is flat on one side. The screw goes into the threaded hole on the right side of the receiver and completely through to the other side of the Firing Pin Screw Hole. The flat side of the Firing Pin sits on the Screw. Thus the Screw is extra long. Tip to tip it measures 2 cm or 3/4". Please see my picture which shows the Shotgun Firing Pin Screw (20ga), the original Rifle Firing Pin Screw with measurements &, the Screw I get sent by parts supplies - much too short. Any ideas before I call a machinist?? Thanks.
|
|
24combo
Frequent poster
If you build in a swamp you may have frogs.
Posts: 113
|
Post by 24combo on Apr 9, 2022 15:20:46 GMT -5
No good answer here but I'm also interested in how this turns out. Good luck with the search.
|
|