|
|
Post by woodsbum on Feb 13, 2023 8:56:32 GMT -5
My 24V series C (also .222/20ga 3") mics out to a modified choke. .603" ID at the muzzle.
|
|
huntchic
Rank Stranger
here to learn and share
Posts: 18
|
Post by huntchic on Feb 13, 2023 9:10:28 GMT -5
Forgot to add mines a 3" chamber as well.
|
|
|
|
Post by woodsbum on Feb 13, 2023 9:28:17 GMT -5
My chart list full @.592; mod @ .603 and imp cyc @ .611 for 20 ga. Full cyc is listed as .617. I think there is a lot of flexibility in defining exact choke restriction. Ive always found it best to shoot and pattern the gun and see if it does what I want, then go from there.
|
|
huntchic
Rank Stranger
here to learn and share
Posts: 18
|
Post by huntchic on Feb 13, 2023 9:28:44 GMT -5
Thanks Woodsbum I appreciate your response to my question.
|
|
huntchic
Rank Stranger
here to learn and share
Posts: 18
|
Post by huntchic on Feb 13, 2023 16:27:39 GMT -5
Update:
I measured bore 5 times in different places and did that 3 times average was .598 - .601 each of the 3 times I did it. Basically.600 would be what I would call it.
|
|
|
|
Post by cas on Feb 23, 2023 20:33:33 GMT -5
Thought the 20's were all Mod, except for the Campers that were Cylinder bore. But all this stuff is long forgotten on my part.
|
|
huntchic
Rank Stranger
here to learn and share
Posts: 18
|
Post by huntchic on Mar 17, 2023 11:39:16 GMT -5
I believe Your correct, from my research it seems that modified was the norm for the 20's.
|
|
