|
Post by model24s on Jul 6, 2023 21:16:50 GMT -5
Hello! New poster here. I have a model 24 series S field grade with .22LR and .410 barrel. The front of the trigger guard sliding block barrel release is cracked on my gun and I have been unable to find the correct schematic that showed the part. I have searched Numrich schematics as well as others with no luck. Any help would be greatly appreciated!!
|
|
|
Post by neilrr on Jul 7, 2023 7:34:21 GMT -5
model23s,
Welcome to the forum. It would be helpful if you can post a picture of your gun and indicate which part you are looking to replace.
|
|
|
Post by bigkelly on Jul 7, 2023 9:00:31 GMT -5
I think you're pretty much screwed.If you're talking about the barrel release (it's not a slide so much as a flat tab that goes in a slot in the front of trigger guard) I NEVER seen that part anywhere--Good luck
|
|
|
Post by cas on Jul 7, 2023 18:19:31 GMT -5
Yes that will be a tough one. I think I saw one for sale (the whole works) ONCE, many years ago, probably Ebay. Best bet might be trying to make something that will work just well enough. Or find someone with a 3D printer willing to experiment.
|
|
|
Post by model24s on Jul 10, 2023 7:22:12 GMT -5
the part I’m looking for is the button in front of the trigger guard. Picture is not my gun but has a similiar release button.
|
|
|
Post by neilrr on Jul 10, 2023 8:45:36 GMT -5
model24s,
Go to the Nunrich website and look under Savage/Stevens/Springfield/Fox Shotguns 9478, part number 30. There is a "release button", new reproduction product #474140A for $14.95 that is very similar, if not the same as the part you are looking for and is in stock. The button and operating mechanism looks very similar to one on a schematic I found for a Savage 24C that has this type of release button. Numrich also has a new reproduction black plastic trigger guard if needed. Good luck.
|
|
24combo
Frequent poster
If you build in a swamp you may have frogs.
Posts: 113
|
Post by 24combo on Jul 10, 2023 16:50:36 GMT -5
Nice find neilrr.
|
|
|
Post by neilrr on Jul 12, 2023 7:02:48 GMT -5
model24s
If you purchase the "release button" replacement part from Numrich and it is the correct one for your model 24 it would be great to advise us so others who may need this same part know where they can obtain it. It is not unusual to find parts from other model firearms that will work as replacement parts in your model firearm since many manufacturers would use the same design from older model firearms in their newer ones. The basic idea is that if a design works why spend time and money to reinvent parts that are functional and work well.
|
|