|
Post by captcapsize on Sept 11, 2013 20:06:35 GMT -5
I want to mount a sling on my 24 .22mag over 20 ga. Anyone have a suggestion as to how to connect a sling swivel to the barrel?
|
|
|
Post by txbob on Sept 11, 2013 20:36:38 GMT -5
Uncle Mike's Quick Detachable .22 Tube Magazine Magnum Band Sling Swivels (Blued, 1-Inch Loop)
I found one of these at a gun show the split band fit on the barrel & sight clamp on my 24V
|
|
|
Post by squirrelmaster on Sept 12, 2013 15:21:53 GMT -5
It needs to be a .750 diameter barrel band. I used a GROVTEC GTSW-303 for lever action center fire rifles. Works good. They also have one just for 20 gauges. I have one on a Winchester pump 20.
|
|
|
Post by captcapsize on Sept 12, 2013 19:23:04 GMT -5
I am on their web site and I don't see anything that will work.??
|
|
thehunteriam
Will probably stay
My Writings : http://www.wideopenspaces.com/author/eric-nestor/
Posts: 84
|
Post by thehunteriam on Sept 12, 2013 19:35:26 GMT -5
Uncle Mike's QD Quick Detachable Super Swivels, #1595-2. That is what I use with good results.
|
|
|
Post by captcapsize on Sept 13, 2013 9:15:18 GMT -5
Thanks for that info. I found one on ebay and "buyed it now". Also bid on two separate peep sights, should end up with one of them, hopefully not two.
|
|
|
Post by captcapsize on Sept 15, 2013 20:13:06 GMT -5
Lost out on the peep sights, the bids went into the stratosphere I wasn't willing to pay that much. So I guess I'll mount my 4x Leupold again.
|
|
|
Post by jojonabs on Oct 20, 2013 1:03:08 GMT -5
Thanks, thehunteriam, just got my Uncle Mike's QD Quick Detachable Super Swivels, #1595-2 you recommended in the mail today. Less than an hour of installation and it seems like it fits my 20 gauge barrel perfectly. So far I'd recommend them to anyone looking for a sling mount.
|
|
|
Post by THE_HUNTERIAM on Oct 20, 2013 13:50:09 GMT -5
Thanks, thehunteriam, just got my Uncle Mike's QD Quick Detachable Super Swivels, #1595-2 you recommended in the mail today. Less than an hour of installation and it seems like it fits my 20 gauge barrel perfectly. So far I'd recommend them to anyone looking for a sling mount. No problem. Enjoy!
|
|
|
Post by jrguerra on Jan 17, 2014 14:01:59 GMT -5
Uncle Mikes sells (or sold one() for 20 gauge barrels. Editted later - should have also mentioned if you have a .410 barrel, the Uncle Mike's Marlin 336 magazine tube sling mount fits, its pictured above as well on that old FIE .410 single.
|
|
|
Post by sneektip on Jan 22, 2014 15:48:33 GMT -5
TIP: put a bit of blue Loctite on the two ring halves where they contact the barrel.
|
|