|
|
Post by mospurs on Dec 18, 2013 2:15:57 GMT -5
On the 24f model , is it possible to rebarrel a 12 ga model to a different caliber.
a 17remington/12ga. Would be the ultimate fur gun.
anyway to regulate barrels???
any 24 gunsmith specialists out there??
any way to work on triggers?.
|
|
|
|
Post by bigkelly on Dec 18, 2013 8:19:33 GMT -5
Alas I just tried to get my gunsmith to re-chamber my 12/22 hornet to 17 remington (centerfire)but according to my smith,Brownell's told him the 17 sleeves they sell are for 17 rimfire cartridges only.Something about the sleeve not being able to handle the increased pressure of the centerfire round.Let us know if you find out something else.
|
|
rj
Rank Stranger
Posts: 19 
|
Post by rj on Dec 18, 2013 10:25:54 GMT -5
BigK:
Those Brownells liners are only .315 in diameter.
The base of the .17 Rem is .376.
Redmans does make other liners, however, so contacting them may get you what you want.
mospurs:
If the "F" is close to the "C" model, there is an article linked on the FAQ page which may help with your trigger.
|
|
|
|
Post by txbob on Dec 18, 2013 13:26:29 GMT -5
MCA Sports/Ace Bullet Company
THE ONLY SOURCE FOR CUSTOM ADAPTERS AND INSERTS IN THE WORLD!
Check out this guys website. I have bought two inserts from him for my .222 a 22LR & a 22Mag. and I have a custom 22Hornet
on order. if you don't see what you want on his site e-mail him with what you want. He has been real easy to work with & has responded pretty fast to my e-mails.
|
|
|
|
Post by bigkelly on Dec 19, 2013 8:12:52 GMT -5
RJ
Thanks for the tip but Redmans doesn't have any liners that will work either
|
|
