|
Post by sidewinder on Jan 20, 2014 15:45:52 GMT -5
I was recently trying to do some trading for a Savage 24 .22LR/.410. It had the receiver/butt-stock half moon scollops.The trigger guard was the cast aluminum variety. The butt-stock and forearm both appeared to be walnut, with a shiny finish on them. The .410 left side chamber area had an "ES" (without the quotation marks)very clearly marked with a metal stamp.
The person I was trying to deal with kept thinking the ES had some significance, as it was just out there, all by itself, on the left side of the .410 chamber. I didn't do the deal for a couple of reasons. One of which was that the .22LR muzzle had what appeared to be a crude "crown"! it appeared to have been countersinked! I've never seen one of these before either.
My question to the gurus is this...couple of questions, actually. 1. Any idea what the metal stamped ES on the left side of the .410 chamber is? (Any monetary value in this?) 2. Is the "countersink" crown job a homemade deal, or was there some coming from the factory that way?
Thanks, I appreciate your help on this matter. I'll bet Odell knows exactly what it means, and if there's any significance to it.
I forgot... it has no S/N, the breech opening tang is behind the hammer, and the barrel selector is on the right hand side of the receiver, and it's a straight Savage 24. It has a removable front blade sight that is held on with a screw, and a leaf rear sight. Hope this helps some!
|
|
|
Post by cw on Jan 20, 2014 16:37:53 GMT -5
The 24c-DL I got last month has a chamfer type crown too!! Surely looks home done.. by a ham handed high school kid with two left hands. BUT It shoots just fine. Go figure. CW
|
|
|
Post by sidewinder on Jan 20, 2014 17:23:44 GMT -5
The 24c-DL I got last month has a chamfer type crown too!! Surely looks home done.. by a ham handed high school kid with two left hands. BUT It shoots just fine. Go figure. CW Thanks CW, I had never seen that on any Savage 24s before, and I have a few of them...although not as many as Odell and Big Kelly. I'm still perplexed about the stamped ES on the left side of the .410 chamber.
|
|
|
Post by odell23 on Jan 21, 2014 9:22:29 GMT -5
I'll give you that the "ES" stamping is odd, but I don't know of any significance to it. Counter sinking the crown was not something Savage would have done. Sounds like a pre 1964 Model 24 with some gunsmith work done to it and a mysterious stamp to me.
|
|
|
Post by sidewinder on Jan 21, 2014 20:18:25 GMT -5
I'll give you that the "ES" stamping is odd, but I don't know of any significance to it. Counter sinking the crown was not something Savage would have done. Sounds like a pre 1964 Model 24 with some gunsmith work done to it and a mysterious stamp to me. Thanks for the information Odell. The stamped letters are a mystery to me too. They look as though they are factory applied...by that, I mean they are deep, clear and crisp and together with the appropriate spacing. I agree that the gunsmith work on the rifle barrel appears to have been done after the gun left the factory. Thanks again for your help.
|
|