|
Post by barney on Jan 24, 2015 15:47:22 GMT -5
just picked up a 24v-d..chambered in 222/20..was wondering the year serial #d433... from what I seen on here its a 1952? yes/no..thanx in advance..james
|
|
blaze
Frequent poster
Posts: 108
|
Post by blaze on Jan 24, 2015 18:40:04 GMT -5
The 24v-d are nice guns, very versiti1e. But, made in 1952 is incorrect. 1960's is more correct I believe. Enjoy the gun.
|
|
|
Post by barney on Jan 24, 2015 19:25:55 GMT -5
reason im wondering is at the beginning of this forum it said d=1959..but wasn't sure that's y im asking on here
|
|
|
Post by glocknutt on Jan 24, 2015 22:23:38 GMT -5
just picked up a 24v-d..chambered in 222/20..was wondering the year serial #d433... from what I seen on here its a 1952? yes/no..thanx in advance..james I have the same one, im thinking 1960s also.
|
|
|
Post by winkman on Jan 24, 2015 23:38:44 GMT -5
just picked up a 24v-d..chambered in 222/20..was wondering the year serial #d433... from what I seen on here its a 1952? yes/no..thanx in advance..james The 'D' wether you are referring to the 24V Series 'D' or the 'D' as the first digit of the serial number has nothing to do with dating the gun via the date code. If you go to the main page, savage24.com and go into the FAQ section, there are detailed instructions on how to find the date code and determine year manufactured as a result, however, the date code is only effective till 1970. The fact that the gun has a serial number tells you that is is at least a 1968 cause thats about when they serial numbered the 24's due to the Gun control act of 1968. The 24V was first introduced in 1967 and was only chambered for the .222 Remington that first year. The Blue Book mistakenly says that 1967 was the only year for the .222 Remington, I think they meant to say that is was only produced in .222 Remington that first year. The 24V was manufactured from 1967 right up till they went into Chapter 11 in 1988 in a variety of centerfire calibers, some scarce, only being produced for a year or two, but the 24V was chambered for the .222 Remington every year it was manufactured. If after following the date code instructions you cannot find a code and believe the gun was manufactured after 1970, you can again go back to the main page, Savage24.com and go to the 'catalog section' look at the catalogs dated after 1970 and try to match up checkering patterns, barrels manufacturing, etc. to determine the year. If you look at the pics in the catalogs, you will see what I mean. Sometimes you can pick it out right down to the year, sometimes it's an educated guess for between a year or 2 or 3. The point is, a lot of people, years ago went to a lot of trouble to identify and document these things, and Cas was good enough to do all the work to get it on the site. You should take advantage of whats there to help you out with trying to date your gun. Good luck.
|
|
|
Post by barney on Jan 25, 2015 6:55:15 GMT -5
I couldn't find the catalog section,however I did find some markings on the gun..47 in the oval..sp9 twice and h twice..cant seem to get to the information u r talking about..would realy appreciate your help on this..thanx again james
|
|
blaze
Frequent poster
Posts: 108
|
Post by blaze on Jan 25, 2015 12:43:34 GMT -5
Barney: You may have to be a member to access some of the information. The forum is free to join and has lots of information about you 24V-D.
|
|
|
Post by member barney on Jan 26, 2015 17:53:03 GMT -5
well im a member now..i still cant find the catalog section..please help
|
|
|
Post by member barney on Jan 26, 2015 18:07:20 GMT -5
found the catalogs,,phew..looks like 1977 by the stock but still would love to narrow it down
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2015 18:57:47 GMT -5
Is anyone knowledgeable enough to distinguish approximately the years when the 24 V changed to V-A, then V Series B, first year for V series C, then Series D........etc.? it looks to me like the series D was introduced around 1979 but that's just looking at the catalogs. I have a series B and a series D. Id settle to know the last year ether was produced so I could have a conservative approx age on them. Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2015 19:01:36 GMT -5
Just looked again and I say 1980 for the series D.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2015 20:08:38 GMT -5
It might also be noteworthy to mention that the only differences in my series b and series d (besides the rifle chambers) are the fancy stock/forearm on the D (which includes the checkering, finish, caps and wood grain, but not the shape or fitting to the receiver)and the sight blades (front and back). Receivers are identical, forearms are the same size/dimensions/shape(again with the checkering and finish differences) and the barrels are identical except the D is dovetail cut for the front site blade while the B has a screw in ramp type. The D looks like a Cadlliac Deluxe version of the B. Id post a pic if I could figure out how.
|
|
|
Post by odell23 on Jan 30, 2015 15:38:43 GMT -5
Let's see if this helps:
The Savage 24V centerfire line of guns was produced from catalog years 1966 to 1988. There were 5 different guns made over this span and in this order: the 24V, 24V-A, 24V Series B, 24V Series C, and 24V Series D. The 24V was produced from catalog years 1966 through 1968. Then the 24V-A from catalog years 1969 through some time in the early to mid 1970's. It gets really fuzzy in the timeline in the transition from the 24V-A through the 24V Series B and Series C. But the first year of the 24V Series D began in catalog year 1979 and ran through to 1988 when Savage Industries filed for bankruptcy.
One of the easiest identifying characteristics among the 24V line is the how the breech is constructed. The 24V and 24V-A both have the rather unsightly and large monoblock breech. The shape of the monoblock changed slightly with the introduction of the 24V Series B, but was still ugly. By the 24V Series C they had removed the top portion of the monoblock and were able to braze the rifle barrel to the block which still housed the shotgun barrel. The 24V Series D completely eliminated the monoblock all together. The breech area of shotgun barrel was still oversized but it was nicely contoured and now both barrels were able to be brazed to each other without the addition of a monoblock.
I will also mention the 24V and 24V Series D each had 2 variations. The 24V Type I had a screw on ramp front sight separate from the barrel band whereas the Type II had a front sight that was integral with the barrel band. The 24V Series D Type I had the scalloped buttstock to frame shape whereas the Type II had a straight line flush fit buttstock to frame shape.
Since all 24V guns were made as 20 gauges the only variation was in rifle caliber. Here is a list by year of calibers available: 1966-1971: .222 Remington 1972-1978: .222 Remington / .30-30 Winchester 1979: .222 Remington / .30-30 Winchester / .223 Remington / .357 S&W Magnum 1980-1982: .222 Remington / .30-30 Winchester / .223 Remington / .357 S&W Magnum / .22 Hornet 1983: .222 Remington / .30-30 Winchester / .223 Remington / .22 Hornet / .357 Remington Maximum 1984-1988: .222 Remington / .30-30 Winchester / .223 Remington
There is more to this story, but I think this is enough satisfy most for now.
|
|
|
Post by barney on Jan 31, 2015 5:27:23 GMT -5
mine must be a 1979 type 2..for it has an integral front sight.not a band w/a screw like shown in pictures..thanx guys for info..i love this gun
|
|