|
Post by bob5171 on Feb 21, 2015 15:33:47 GMT -5
Numrich has a rear sight and step for all model 24 series except N. Would the series M fit the series N also?
|
|
jsr5
New Guy
Posts: 35
|
Post by jsr5 on Feb 21, 2015 17:00:14 GMT -5
Looking at the identity thread looks like a m.n,p or S would likely interchange but you should probably hold off for a better response from more knowledgeable folks. Hang on somtimes it takes a bit for them to have the time to get in here.
|
|
|
Post by odell23 on Feb 24, 2015 23:47:45 GMT -5
The Series M, N, & P guns were all pretty close. The only differences you might find is in the elevators or possibly the notch height. If it's too low the elevator should work to correct the issue. If it's too tall then you'll have to shave it down some with a file. Either way you can make it work.
|
|