|
Post by Gene C on Apr 7, 2015 19:01:41 GMT -5
I purchased a model 24 223/12 gauge it came with a scope and i would like go back with open sights i have 3 small threaded holes to the rear 2 close together and the 3rd is about 4" apart
then i have another threaded hole about mid barrel so i' m trying figure what i need As well as where i can buy i would love some help
gene
|
|
|
Post by nclftsportsman on Apr 7, 2015 20:52:09 GMT -5
I am a member but not logged in. I have the same gun. The original iron sights were dovetailed with one supporting screw not screwed on. Describe the dovetail, it should be near the stock side of the single screw.
|
|
|
Post by Gene C on Apr 15, 2015 11:42:45 GMT -5
I do not have a Dove tail only the mounting screw holes from the rail so a rail Mount?
|
|
jsr5
New Guy
Posts: 35
|
Post by jsr5 on Apr 16, 2015 3:58:53 GMT -5
I have seen at least one that has the rear sight dovetailed into the rail perhaps your rail is not original? and the rear sight went with the old rail when changed. if you have the scope mount on it you could use a sight xs sight systems that mounts a backup peep on the rail at the rear most end.
I have one of those btw it seems well made. I have it to mount on my rendition of a "scout" rifle build that I"m doing from a Ishapore SMLE. I haven't finished the project yet so have not actually used it.
|
|