|
Post by moonwater on Oct 29, 2019 16:33:16 GMT -5
After firing slugs 2 3/4 inch...my 24dl stopped locking up...the barrel will lock up on a diferent receiver..The trouble seems to be with the receiver..any experience with this?nothing looks broken..just wont lock up
|
|
|
Post by bigkelly on Oct 29, 2019 16:53:50 GMT -5
lube the heck out of it, esp. where the locking bolt comes thru the bottom of the receiver
|
|
|
Post by mnbobster on Oct 30, 2019 10:01:46 GMT -5
Your receiver is probably gunked up. Dirt gets in through all the openings and sticks to the oil inside. Spray into the trigger opening and into the latch with cleaner/lube, let it soak, and then work it. spray it again (rinse), and blow it out with an airhose. Wipe off the excess, and let it dry for a bit. As a last resort, take it apart and clean it, and reassemble it (or have a gunsmith do it for you). Lastly, Lube it as bigkelly says with gun GREASE.
|
|