|
|
Post by muffin1976 on Jul 31, 2022 20:31:32 GMT -5
Guys, I need a buttplate for a 24C, with the cartridge trap cutout....
PM if you can help...
Thanks
|
|
|
|
Post by jrguerra on Aug 1, 2022 6:06:36 GMT -5
That is a popular replacement part many install on other Savage 24s as well as some other rifles and/or shotguns. I wish you good luck in finding one.
|
|
|
|
Post by 24combo on Aug 1, 2022 16:42:12 GMT -5
It's not an easy one to find.
|
|
|
|
Post by bigkelly on Aug 2, 2022 6:25:45 GMT -5
are you talking about the silver plate that swings out?
|
|
|
|
Post by muffin1976 on Aug 2, 2022 8:11:12 GMT -5
are you talking about the silver plate that swings out? NO, the actual but plate with the opening..... |
|
|
|
Post by muffin1976 on Aug 2, 2022 10:15:48 GMT -5
You guys are correct, they seem to be scarce as hens teeth........ So I 'fixed' it  I didn't notice when I acquired it that it only had the shotshell hole, no 'slot' to get to the 22LR holes in the stock...... to be completely honest, I didn't even notice that it had the cartridge trap.... Looks better from about 2'....  Anyway, NO longer needed..   |
|
|
|
Post by 24combo on Aug 2, 2022 16:12:08 GMT -5
That works.
|
|
|
|
Post by cas on Aug 12, 2022 19:03:56 GMT -5
There's also two types/sizes. One oval shaped, one keyhole shaped. The series P stock's are smaller than the series S guns IIRC. I bought one years ago for my 24C only to find it didn't fit. Then I found I didn't really care. lol It's around here somewhere.
|
|
|
|
Post by jeffb1911 on Sept 5, 2022 18:44:27 GMT -5
Many years ago as a poor college student i made one using a regular butplate and a dremel. Used the metal cutoff blades IIRC because that is all i had. Worked fine until i had to sell the gun.
|
|
I didn't notice when I acquired it that it only had the shotshell hole, no 'slot' to get to the 22LR holes in the stock...... to be completely honest, I didn't even notice that it had the cartridge trap....
