|
Post by rharper on Apr 18, 2013 20:00:04 GMT -5
Hi folks.
I finally got my "new" 24 today (S series .22/20, field grade). It was an online purchase, and I've been waiting a couple of weeks, so I was pretty excited (still am) and got it out in the back field as soon as I got it home.
Anyhow, I quickly discovered that the .22 barrel was shooting a couple of inches to the right, at maybe 25-30 yards, while the shotgun was close enough to wreck water bottles at the same range.
So it needs to be sighted in, and I have a laser boresighter, so I waited 'til dusk, and set it up. Turns out, the .22 barrel is pointed slightly to the right (judging by the sights), but not fixably so--I can't tap the rear sight it over enough to get it to line up (not without taking it halfway out, anyway. It doesn't exactly diverge much (I can point the laser out as far as it shines clear, and the offset looks about the same), but it does seem a bit odd.
The shotgun barrel is closer, actually--it's a little low (as I expected), and slightly to the left when the rear sight is centered, but definitely closer to "straight" than the .22 barrel.
Is this normal, and is there a fix? Or do I just have to learn to adjust (not necessarily a bad thing, just inconvenient).
Between this and the cracked stock it certainly isn't a mint piece, but I'm liking it so far nonetheless.
Thanks,
Ryan
|
|
|
Post by rharper on Apr 18, 2013 21:24:32 GMT -5
Oh, and the front sight is fixed and centered, so that (probably) isn't the issue.
I'm coming off a solid, super accurate, Sears single shot .22 that has dovetailed sights front and rear. It took minimal tap adjusting when I got it, and has taken many a squirrel with accuracy that surprised even me (it's better than I am, and even makes me look better than I ought)... so I'm quite spoiled.
|
|
|
Post by cas on Apr 19, 2013 1:57:17 GMT -5
The laser will lie. Adjust and shoot, the only way to know for sure.
|
|
|
Post by rharper on Apr 19, 2013 7:56:42 GMT -5
I'll be back out in the field today, for just that reason.
Unfortunately, I don't have much .22 ammo, and with the store shelves still empty I have to make every shot count.
|
|
|
Post by rharper on Apr 19, 2013 11:28:08 GMT -5
It's bent.
I took it in to a gunsmith this morning, and it is very clearly bent.
It's a lemon.
|
|
|
Post by cas on Apr 19, 2013 15:04:59 GMT -5
Figure out a way to put a dot sight on it?
|
|
|
Post by rharper on Apr 19, 2013 15:21:11 GMT -5
That would be an interesting option ... though I think a new barrel would be a better option, should I be able to find one anywhere.
I'm currently corresponding with the seller, to sort something out.
|
|
|
Post by sakoluvr on Apr 20, 2013 19:01:51 GMT -5
I don't think it would be cost effective to buy another barrel. Why not scope it up and see how it shoots? Were you going to stick with open sights?
|
|
|
Post by rharper on Apr 21, 2013 7:58:42 GMT -5
Yeah, I was planning on keeping the open sights ... plus there's that whole "do not fire shotgun barrel with scope attached" thing.
The gunsmith also said the scope is an option, but not really a good one (the bend is pretty bad, apparently, to his eyes, and the scope's compensation will be limited). I do have a scope sitting around I might try, just to see, though.
|
|
|
Post by cas on Apr 24, 2013 13:14:26 GMT -5
"Do not fire..." Was mostly Savage covering their butts for people using crappy mounts.
|
|
|
Post by rharper on Apr 26, 2013 15:31:04 GMT -5
I'll worry about that later, I guess ... meanwhile, I'm still waiting to hear from the seller.
|
|