|
|
Post by kemhardt34 on Jan 14, 2016 19:48:44 GMT -5
I purchased the original selector switch to replace the broken one and wanted to know if there is any tips/tricks/videos or material that explains how to do it.
|
|
|
|
Post by oldnavychief on May 15, 2016 0:49:46 GMT -5
Hello,
Holy Cow!! Over a hundred views and no one has a tip on replacing the selector switch? A very, very important question posted as it potentially affects so many of us. I have a side mount selector button which works and is nicely tight. Still, it would be nice to hear of any tips on replacing one which has worn. I understand that a worn button can either cause both barrels to discharge at the same time or one or the other barrel to become unreliable. Anyone replaced this switch? Any tips?
Chief
|
|
|
|
Post by painter on May 15, 2016 10:10:01 GMT -5
|
|
|
|
Post by neilrr on May 15, 2016 12:03:45 GMT -5
If you go to one of my previous posts entitled "Need help with locking bolt" there are completed detailed instructions to disassemble and reassemble a Savage 22/410 with a side selector button including tips for installing the main spring without the help of another pair of hands. Good luck and if you need any further help please advise. |
|
